The KP9 Migthy Boompole has a collapsed length of 28″ (71.2cm) and an extended length of 9′ (2.75m) and only weighs 1.4lbs (0.63kg). This 6-section Boompole features a removable headpiece for cable reconfiguration without soldering. The top attachment is a 3/8″ – 16 male thread and the bottom has a removable rubber bumper. Compatible with the KPCK9 cable kit and bottom (KPCCR) module to allow for a coiled cable option with a side XLR exit. Made in the USA.
The KP9, Mighty Boompole has a collapsed length of 28″ (71.2 cm) and an extended length of 9′ (2.75 m) and only weighs 1.4 lbs (0.63 kg). This 6-section Boompole features a removable headpiece for cable reconfiguration without soldering. The top attachment is a 3/8″ – 16 male thread and the bottom has a removable rubber bumper. Made in the USA.
The New K-Tek Klassic Poles offer increased interchangeability with its removable headpiece. Gone are the soldered and sealed poles of the past. Today’s redesigned headpiece, after removing a standard sized set screw, simply threads on and off the tube smoothly. The cable of choice can be removed or installed?without soldering. The boompole is readily transformed to un-cabled, coil cabled or with a transmitter at the top or the bottom. There are no more time-consuming transformations and no need to purchase a completely new system just to comply with a cabling change.
K-Tek has designed poles that are more rigid and have a shorter collapsed length that is desired in today’s production environment. The Mighty Boompoles maintain the original light weight of the tubes, yet the new design features added strength. Also, adding a sixth section and wider tubes increases the stiffness and optimizes handling balance. The result is quicker cuing and more user control of the microphone.
Another new benefit is a change to the locking collars. The traditional K-Tek captive collett has been modified with a thicker yet smoother surface allowing for more subtle, gradual extension of each section. A new anodizing process combined with changing the exterior dimples to oval divets gives a better grip and smoother feel when opening and closing each collar. The finish between the tubes has also been modified so the Migthy sleekly glides open and closed. New Migthy poles are hand-burnished to diffuse handling noise.
Compatible with the KPCK9 cable kit and bottom (KPCCR) module to allow for a coil cable option with a side XLR exit.
K-Tek Mighty Booms Low Profile Right Angle Connector Female
Coiled Cable with RF shielding, Mighty Boom Right Angle connector, Compatible with KP9, Made in USA
Sidekick Mighty Boom Transmitter Adapter Bottom Attachment Module
I for one love this new K-Tek KlassicPro line of poles and will likely buy a few more in different lengths!
Very well done, K-Tek! Nice engineering!
1384-F Poinsettia Ave.
Vista, California 92081
Stay up to date with K-Tek!
© 2022 All Rights Reserved K-Tek